GEAR-X TEE-Black
GEAR-X TEE-Black

GEAR-X TEE SHIRT
Show your support for our great products

Available in- XXXL XXL XL L M

Please advise size requirement when ordering

$25.00 Select options
P1 Spec Rear Wing DC2 Integra
P1 Spec Rear Wing DC2 Integra

Our fully adjustable rear wing has been developed over several years on our own Race cars.
Tested by well known drivers in a multitude of configurations on various models of cars. This wing has proven to provide an excellent balance of rear grip when used with our P1 Spec Splitter Kit and Side Skirts.
Testing and our calculations indicate that a down force of approximately 180lbs with minimal drag can be created at 120mph depending on the wing angle.
A well worthwhile addition to make your race car a winner.
lightweight reinforced Fiberglass construction, Multi fit attachment and pick up locations.
All Stainless steel hardware and powder coated uprights and end plates  (Gurney lip in photo was only for testing. Discontinued)

 

NEW*

Our Wings are now available in:

  • Raw $495.00 Prep & Paint or wrap yourself.
  • Satin Black $525.00

Call or email – [email protected] to specify FINISH Material and get a Shipping rate quote.

$560.00$760.00 Select options
P1 DC2 US Spec. ’98-’01 (R)
P1 DC2 US Spec. ’98-’01 (R)

By far our most popular P1 Kit. These Splitter kits give the maximum front downforce, stability and grip, with minimal drag.
Used by Club Racers and Professionals alike. You won’t find a more cost effective, bolt on splitter kit anywhere.

$565.00 Add to cart

’98-’00 EK Si Civic Time Attack Style Air dam

’98-’00 EK Si Civic Time Attack Style Air dam

’98-2000 CIVIC Si Front splitter kit – Not NASA Legal

$499.00

Select options

KIWI Signature Series rear LCA’s

KIWI Signature Series rear LCA’s

KSS-103 EF/ EG/ DC

Once again, working closely with manufacturers and our hands on race team drivers we have come up with a race proven rear lower control arm design that combines function with style and delivers rock-solid performance for mild to extreme suspension setups. The rear LCA plays an important handling role in any modified suspension system. Our manufacturers concentrated on areas that others disregard while adding features not seen in competitors products.

The Kiwi Signature Series LCA’S are made of light-weight 7075-T651 Aerospace aluminum has a tensile strength higher than stainless steel and will not deflect or break in the harshest environments. The design employs an innovative spherical bearing system which allows proper angular misalignment during suspension movement without binding up causing fatigue and premature failure like polyurethane or rubber bushings on most other aftermarket arms available today. The design also features 4 sway bar mounting provisions allowing for different stiffness and better end-link alignment and a bronze bushing on the shock mounting point that allows the use of heavy sway bars allowing softer spring rates for the ultimate ride quality without compromising performance. All these features add up to not only the best LCA you can buy, but a patent-pending design that is worthy to be included in the “KIWI Signature Series.”

$269.99

Add to cart

GEAR-X TEE-Black

GEAR-X TEE-Black

GEAR-X TEE SHIRT
Show your support for our great products

Available in- XXXL XXL XL L M

Please advise size requirement when ordering

$25.00

Select options

P1 Spec Rear Wing DC2 Integra

P1 Spec Rear Wing DC2 Integra

Our fully adjustable rear wing has been developed over several years on our own Race cars.
Tested by well known drivers in a multitude of configurations on various models of cars. This wing has proven to provide an excellent balance of rear grip when used with our P1 Spec Splitter Kit and Side Skirts.
Testing and our calculations indicate that a down force of approximately 180lbs with minimal drag can be created at 120mph depending on the wing angle.
A well worthwhile addition to make your race car a winner.
lightweight reinforced Fiberglass construction, Multi fit attachment and pick up locations.
All Stainless steel hardware and powder coated uprights and end plates  (Gurney lip in photo was only for testing. Discontinued)

 

NEW*

Our Wings are now available in:

  • Raw $495.00 Prep & Paint or wrap yourself.
  • Satin Black $525.00

Call or email – [email protected] to specify FINISH Material and get a Shipping rate quote.

$560.00$760.00

Select options

RD-H2945- REAR DIFFUSER     (DIS- CONTINUED)

RD-H2945- REAR DIFFUSER (DIS- CONTINUED)

RD-H2945 REAR DIFUSER 29″ x45″
’94-’01 DC2 INTEGRA
’92-’00 CIVIC Coupe.

Designed on our own famous #65 and #66 DC2 Touring Cars to help airflow under the car works in conjunction with our well proven P1 Spec Front Splitter and side skirts.
Improve stability, reduce drag and improve your speed. Powder coated Lo Gloss Black.

$355.00

Add to cart

P1 DC2 US Spec. ’98-’01 (R)

P1 DC2 US Spec. ’98-’01 (R)

By far our most popular P1 Kit. These Splitter kits give the maximum front downforce, stability and grip, with minimal drag.
Used by Club Racers and Professionals alike. You won’t find a more cost effective, bolt on splitter kit anywhere.

$499.00

Add to cart